Guide · Certification
IP68 vs IP69K: what the ratings actually test
Two water tests that measure different things, on new phones, in a laboratory. What each one covers, what neither covers, and what to check before you rely on either.
IP68 and IP69K are two separate tests. IP68, defined in IEC 60529, means a device is dust-tight and survives continuous immersion deeper than one metre, at a depth and time the manufacturer sets: for Ulefone phones, typically 1.5 m or 2 m for 30 minutes. IP69K, defined in ISO 20653, means it survives close-range jets of 80 °C water at 80 to 100 bar. Passing one does not imply passing the other, which is why rugged phones list both. Neither is tested after a drop or on an aged phone.
How to read an IP code
The two digits are separate scores. The first is protection against solids, from 0 to 6; the second is protection against water, from 0 to 9. An X in either position means that part was not tested, so IPX8 says nothing about dust.
| Digit | What it means | How it is tested |
|---|---|---|
| 6 (first digit) | Dust-tight | Hours in a chamber of circulating fine talc, with no ingress allowed |
| 7 | Temporary immersion | 1 m of water for 30 minutes |
| 8 | Continuous immersion beyond 1 m | Depth and duration agreed by the manufacturer; must be harsher than 7 |
| 9 / 9K | High-pressure, high-temperature jets | 80 °C water, 80–100 bar, 14–16 L/min, 10–15 cm away |
IP68: the number that is not in the standard
IP68 is the only common rating whose test conditions are not fixed. The standard requires only that it be harder than IP67's one metre for 30 minutes. The actual depth and time are chosen by the manufacturer, which is why two IP68 phones can promise very different things.
Ulefone states its conditions on some product pages and not others. The Armor 33 Pro is listed at 1.5 m for 30 minutes; the Armor Mini 5 at 2 m for 30 minutes. Where a page gives only “IP68”, the conditions are not published.
The test uses still, fresh water at room temperature. Salt water, chlorinated pools, soapy water, hot water and moving water are all outside it. So is pressing buttons underwater, which pushes water past seals that would hold it at rest.
IP69K: a hose-down test, not a deep-water test
IP69K comes from vehicle and food-industry equipment that is cleaned with steam jets. The device sits on a turntable while a flat nozzle 10 to 15 cm away sprays 80 °C water at 80 to 100 bar, 30 seconds at each of four angles (0°, 30°, 60° and 90°).
That makes it a good proxy for a phone that gets hosed down on a farm, in a kitchen or at a wash bay. It says nothing about depth: a jet test lasts two minutes and never submerges the phone. IEC 60529 itself notes that a device rated for immersion is not assumed to pass the jet tests unless it is marked for both. That is why rugged phones carry the double mark IP68/IP69K.
What neither rating covers
- A phone that has been droppedBoth tests are run on new, undamaged units. A cracked back, a lifted screen edge or a bent frame after a fall can open a path for water that the test never saw.
- A phone that has agedGaskets and adhesives harden with heat and time. A rating describes the phone on the day it was tested, not after two summers on a dashboard.
- Open ports and flapsIf a port cover is part of the seal, the rating assumes it is closed. Charging while wet or with a damaged flap is outside the test.
- Your warrantyAn IP rating is a test result, not a promise to repair. Many phone warranties exclude liquid damage regardless of rating; check the terms from the seller you buy from.
What to check before relying on it
- The stated depth and timeLook for the IP68 conditions on the product page. If they are absent, assume no more than IP67's 1 m for 30 minutes.
- Fresh water onlyRinse the phone in fresh water after salt water or chemicals, and let the speaker and microphone ports dry before charging.
- Inspect after a fallAny crack or gap in the housing ends the water rating, whatever the box says.
- Treat IP69K as hose-proof, not pressure-washer-proofA domestic pressure washer held at point-blank range can exceed the test's distance and angle conditions.
For how these ratings fit alongside drop and temperature claims, see MIL-STD-810H explained. For which Ulefone phone suits wet work, see which Ulefone phone to buy.
Common questions
What is the difference between IP68 and IP69K?
IP68 is an immersion test: the phone is dust-tight and survives continuous submersion beyond 1 m, at a depth and time the manufacturer sets. IP69K is a jet test: it survives 80 °C water at 80 to 100 bar sprayed from 10 to 15 cm. They test different things, so phones that claim both list both.
Is IP69K better than IP68?
Neither is better; they are different tests. IP69K covers high-pressure, high-temperature cleaning jets. IP68 covers submersion. A phone rated only IP69K has not been shown to survive submersion.
How deep can an IP68 Ulefone phone go?
It depends on the model, because IP68 conditions are set by the manufacturer. Ulefone lists the Armor 33 Pro at 1.5 m for 30 minutes and the Armor Mini 5 at 2 m for 30 minutes.
Can I use an IP68 phone in the sea or a pool?
The IP68 test uses still fresh water. Salt and chlorinated water are outside it. If the phone gets wet in either, rinse it in fresh water and dry the ports before charging.
Does IP68 survive after the phone is dropped?
Not necessarily. IP tests are carried out on new, undamaged phones. Any crack or gap in the housing after a fall can let water in.
Sources checked
- IEC 60529, Degrees of protection provided by enclosures (IP Code), including Amendment 2 (2013), which added digit 9.
- ISO 20653, Road vehicles — Degrees of protection (IP code), the origin of IP69K (replacing DIN 40050-9).
- Test-lab summaries of the IPX9/IP69K procedure: nozzle distance, pressure, flow, temperature, angles and turntable speed (e.g. Mettler Toledo, “The IP69K Rating”; Rolec, “Info IP69K”).
- Ulefone product pages for the Armor 33 Pro (1.5 m, 30 min) and Armor Mini 5 (2 m, 30 min). ulefone.com
Test conditions are taken from the standards and from test-lab summaries of them. Ulefone depth figures are manufacturer claims from its product pages, checked 2026-11-18.