Home/Guides/Thermal resolution

Guide · Thermal

Thermal sensor resolution: 640×512 versus everything cheaper

Why the pixel count decides whether a phone thermal camera is a diagnostic tool or a novelty, and the physics that make every phone thermal camera mislead sometimes.

Thermal resolution is the number of temperature-measuring pixels in the sensor. A 640×512 sensor, such as the ThermoVue T2 in Ulefone's Armor 28 Ultra Thermal and Armor 29 Pro Thermal, has 327,680 of them. A 160×120 sensor, such as the FLIR Lepton 3.5 in the Armor 27T Pro+, has 19,200: one-seventeenth. At the same field of view, each high-resolution pixel covers a quarter of the width, so small targets can be measured from four times further away. Resolution matters more than any other thermal specification.

The resolutions you will meet

Native sensor resolution. Some apps export larger images by upscaling; that adds pixels, not measurements.
ResolutionThermal pixelsvs 160×120Where you find it
640×512327,68017×Armor 28 Ultra Thermal, Armor 29 Pro Thermal; professional handheld cameras
384×288110,5925.8×Mid-range handheld cameras
256×19249,1522.6×Common in clip-on phone cameras and some rival rugged phones
160×12019,2001×Armor 27T Pro+ and 27T+ (FLIR Lepton 3.5); Armor 25T Pro (ThermoVue)
80×604,8000.25×Early thermal phones and entry modules

Why pixels decide what you can measure

Each thermal pixel reports one temperature: the average of everything inside its patch of the scene. If a hot screw terminal is smaller than one pixel, the pixel averages it with the cooler panel around it and reports something in between. The fault is visible as a faint warm spot, or not at all.

A common thermographer's rule is that a target should cover at least three by three pixels for its temperature to be read reliably. Here is what that means with real numbers. The FLIR Lepton 3.5 has a 57° horizontal field of view across 160 pixels, so each pixel spans about 6 mm at one metre. A reliable reading needs a target about 19 mm wide at one metre, or about 9 cm wide at five metres.

A 640-pixel sensor with the same field of view would read the same target from four times further away, or a target a quarter of the size from the same distance. That is the difference between finding which breaker is hot and finding that the cabinet is warm.

Field of view is the other half

Ulefone does not publish the field of view of the ThermoVue T2, so the four-times figure assumes the same angle as the Lepton. A narrower lens puts more pixels on a distant target; a wider one fewer.

Refresh rate, sensitivity and accuracy

  • Refresh rate: 9 Hz or 25 HzThe ThermoVue T2 refreshes at 25 Hz; the Lepton 3.5 at 9 Hz. Many thermal cores sold worldwide are held at 9 Hz because faster ones face stricter US export controls. At 9 Hz, panning is stepped; for still targets it hardly matters.
  • Sensitivity (NETD)The smallest temperature difference the sensor can separate. FLIR rates the Lepton 3.5 at under 50 mK (0.05 °C). Lower is better, and it matters most for subtle targets such as damp patches and insulation gaps.
  • AccuracyUsually given as ±2 °C or ±2 %, whichever is greater, measured against a reference source in lab conditions. In the field, emissivity errors are usually larger than the sensor's own error.

Apparent temperature: where every sensor misleads

A thermal camera does not measure temperature directly. It measures infrared radiation and converts it to a temperature using an assumed emissivity: how efficiently the surface radiates. Human skin, matte paint, wood and electrical tape are close to 0.95. Polished aluminium and stainless steel can be below 0.1.

Shiny metal therefore reads far colder than it is, and also acts as a mirror: you may be seeing the reflected heat of your own body or a nearby lamp. The practical fix is simple: put a strip of matte electrical tape on the surface, wait a minute, and measure the tape.

  • Glass is opaque to thermal cameras. Through a window you see the temperature of the glass, plus reflections.
  • Distance and air lower readings slightly, and steam, rain or smoke can hide targets entirely.
  • Edge overlays and AI sharpening make images crisper. They outline objects using the visible camera or processing; they do not add temperature pixels.

Which resolution do you need?

  • Electrical panels, machinery, building surveys640×512. Small, distant or subtle targets are the job, and the extra pixels are what make the reading usable in a report. See Ulefone thermal phones compared.
  • Leaks, cold spots, overheating parts at home or in a vehicle160×120 is enough when you can get close to the target. The lower price and weight are real advantages.
  • Finding people or animals at nightResolution decides detection distance. 640×512 for anything beyond a garden; at short range either works. Compare infrared night vision, which is a different tool.

Common questions

Is 640x512 thermal resolution good for a phone?

Yes. 640×512 is the highest thermal resolution in a phone and matches professional handheld cameras. It has 327,680 thermal pixels, about seventeen times as many as the 160×120 sensors used in cheaper thermal phones.

What is the difference between 640x512 and 160x120 thermal?

640×512 has 327,680 pixels; 160×120 has 19,200. At the same field of view, the higher resolution can measure a target a quarter of the size, or the same target from four times further away.

Which Ulefone phones have 640x512 thermal cameras?

The Armor 28 Ultra Thermal and Armor 29 Pro Thermal, both using Ulefone's ThermoVue T2 sensor at 640×512 and 25 Hz.

Why does shiny metal read cold on a thermal camera?

Thermal cameras assume an emissivity. Polished metal radiates poorly and reflects its surroundings, so it reads much colder than it is. Cover it with matte tape and measure the tape.

Can a thermal camera see through glass?

No. Glass blocks the long-wave infrared that thermal cameras use. You see the glass surface and reflections, not what is behind it.

Sources checked

  1. Ulefone product pages for the Armor 28 Ultra Thermal, Armor 29 Pro Thermal and Armor 27T Pro+, and the Ulefone newsroom launch post for the Armor 25T Pro (ThermoVue, 160×120). ulefone.com
  2. Teledyne FLIR, Lepton 3.5 specifications: 160×120, 57° horizontal field of view, <50 mK thermal sensitivity, <9 Hz export-compliant frame rate.
  3. Teledyne FLIR and thermography training material on emissivity and the measurable spot size (minimum 3×3 pixels).

Sensor figures are manufacturer specifications. The distance examples are our arithmetic from the Lepton 3.5's published field of view, and say so. Not independently tested.